
PLC
PLC (Programmable Logic Controller)
FULMATIC 7 PLC Systems
Fulmatic 7 – Series PLCs are the programmable control devices which are designed according to the automation needs by considering the tough conditions of the industry. Fulmatic 7 – Series PLCs are offered with 2 different memory options, 32KB and 115KB. All PLCs include Ethernet, Modbus TCP and minimum 1 RS485 Modbus RTU connection as well as webserver feature. The program can be installed into Fulmatic 7 PLCs in RUN state, it doesn’t requires switching to STOP state.
Read more
SCADA Software
WinTr is advanced SCADA Software for monitoring and saving datas of manufacturing processes which seperated large areas. Devices managed from single station and they can be connected with OPC Client, S7 MPI,S7 PPI, Profinet (S7 1200), Modbus RTU(Delta plc and other), Modbus TCP/IP(Delta plc and other), Host-Link protocols(Omron), Mewtocol protocols(Panasonic). SCADA Systems Historical datas related to processes are saved into database.

Speed Plc
PLC Programming Software
Speed PLC program is free. Speed Plc is a complete system that allows you produce a PLC. It consists of Speed Plc editor software (the program that runs in your computer) and firmware (operating system loaded in the chip or board). With Speed Plc editor program you can prepare plc code in ladder language. The code you have prepared will be operated by the firmware. With the Speed Plc editor program you can control all the features of Plc. Firmware is currently only available for Raspberry Pi and STM32f407VGT6. We will prepare the firmware for other boards and integrate it into the Speed Plc system within a short time.
Read moreAbout
Our company was established in 2005 to produce industrial automation software and hardware products. Our goal is to produce four main product groups: Scada, Plc, Operator Panel and Panel Pc. As a result of our R & D studies that we started in 2006, we realized Scada program production. Since 2009, our WinTr scada program has been made available to our valued customers.
Our other project in 2017 is Speed Plc. PLC is a complete system that allows you to produce. It consists of Speed Plc editor software (program running on your computer) and firmware (Chip or operating system installed on the board). With the Speed Plc editor program, you can prepare plc code in ladder language.
This code will be operated by the firmware. With the Speed Plc editor you can control all of Plc’s features. The firmware is currently available for ARM Cortex STM32F407VGT6 and Raspberry Pi. Within a short time, we will build firmware in other boards and integrate it into the Speed Plc system.
Fulmatic 7 series PLCs were introduced in November 2018. Fulmatic 7 series PLC is a production PLC programmable control device which is designed according to the automation requirements by considering the challenging conditions of the industry. Extremely large capacity, the Fulmatic Plc can expand up to 16384 IO. It can transfer data to 17 computers at the same time. The Fulmatic series PLCs are built to compete with upper segment PLCs.
In August 2020, we launched Focus HMI systems. Focus HMI program works on all operating systems. You can use it as a SCADA program for Linux, Ubuntu, Debian, Armbian, Raspberry Pi, Orange Pi. At the same time, we started selling Fultek brand HMI panels.
You must be logged in to post a comment.