Scada

Scada software blog.

Focus HMI Web Server Usage

Focus HMI panels have a web server. All you have to do is click the “Activate Web Server” button from the Setup menu. The standard TCP port number for connecting to the web server will be 80. You can change the port number if you wish. You can choose what you want to reach from the web server section. After making the settings, upload your project to the HMI panel. You can connect to...

Read More

What is SCADA? – About SCADA Software

What is SCADA? – About SCADA Software

Supervisory control and data acquisition (SCADA) is a system of software. In automation projects, PLCs and other automatic devices automatically perform the necessary control operations.

Read More

Version History

5.5.9(24/01/2023):Added six digit Modbus address system. 5.5.8(09/04/2021): Some bugs have been resolved. Performance has been improved. Excel operations have been accelerated. 5.5.7(09/04/2020): Some bugs have been resolved. 5.5.6(30/07/2019): Modbus TCP Slave protocol added. With this addition, a secondary modbus slave address can be defined for all tags. And Modbus TCP master devices are...

Read More

S7-1200 Plc Profinet Protocol

S7-1200 Profinet communication settings for WinTr SCADA. Open the PLC project in the S7 TIA Portal software. Navigate to the PLC Properties. On the General Tab of the Properties page select Protection. Ensure that the “Full access (no protection)” radio button is selected. (The Siemens TCP/IP Ethernet driver does not currently support the use of a password.) Check the “Permit...

Read More

Redundant

What is WinTr Scada Redundant? It is a full backed-up operation mode of two SCADA station. Server-Client mode is different than Redundant. Clients reads/writes all or specific Tag values from the server. Client and Server communicates automation devices separetly. However redundant mode works %100 backed-up notion. Redundant partner doesn’t communicates with the PLCs while the other...

Read More

WinTr scada version 5.0.0 features

1. All Scada functions upgraded, tested and performances increased. Many Scada features updated unlimitedly. 2. Shutdown command added. Operators can shutdown the scada completely with this command without exposing the development page. 3. The feature that allows running projects on the small screens which intended for bigger   screens has added. 4. Multiple Screen Designer has added which...

Read More